C7 Corvette Door Prop Rods (2 in a set)

SKU: 1510
Stock: 18
Price:
$74.99

Color:
Qty: - +
   - OR -   
  • This device will hold the Corvette door open 20 inches so that the interior of the car can be displayed.  This prevents the door from swinging open into other cars, keeps the door from being closed by spectators, and acts as an entry deterrent to keep people from getting in the car. Car’s with door lock electronics linked to interior lighting will sense that the door is closed and will shut off the interior lights and automatically lock the car door with the Door Prop in place (auto-lock feature enabled or lock in place with key fob). The KWIKTOY Door Prop Rod is especially useful for Corvette displays, Car Shows, and dealership displays.
  •  The Door Prop Rods are easy to install & remove quickly. On C5 C6 & C7 Vettes - if locked in place cannot be removed without the vehicle key. It is self supporting when attached to the door striker and easily guided into the car door locking mechanism.  It can be removed instantly by unlocking & opening the vehicle door.
  • KWIKTOY Door prop rods are sold in sets of 2. You will receive a matching pair, one for each door.
  • Installation for C5, C6 Corvettes & cars with double bolt door striker or a D shaped striker and brace: Slip the end of the “S” of the door rod down through the middle of the D shaped door striker (located on the door frame on C5 / on the door on C6) so that the “S” end curves over the striker and under the brace or second striker. Guide the loop end into the lock until it “clicks” into place. Note that the lock will click twice when the loop end of the rod is seated firmly into the lock mechanism. Since your car’s electronics “thinks” the door is closed the interior lights will also turn off and if your car is set to automatically lock it will do so, otherwise you may manually lock your car if you wish to lock the KWIKTOY door prop rod into place. 
  •  Removal for C5, C6 C7 Corvettes & cars with double bolt door striker or a D shaped striker and brace: Unlock your car and pull the door handle just like you would to open your car. The loop end will release and you can open your door.  To remove the door prop from the door striker just reverse the installation steps –C5, C6 Corvettes and cars with double bolt door striker or a D shaped striker and brace: Gently rotate the “S” end up out of the door striker. Do not force or bind the rod during removal as it will easily rotate out of the door striker.
  •  Installation for C3, C4 Corvettes and cars with single bolt door striker:There is an open loop on each end of the C3 & C4 door prop rods. Slip the loop end of the door prop rod over the top of the door striker bolt then push it down over the bottom of the striker. Guide the loop on the opposite end into the lock until it “clicks” into place. Note that on many cars the lock will click twice when the loop end of the rod is seated firmly into the lock. On most older cars with a manual interior light switch mounted in the door jamb a battery disconnect is recommended.
  • Removal for C3, C4 Corvettes and cars with single bolt door striker: Unlock your car and pull the door handle just like you would to open your car. The loop end will release and you can open your door.  To remove the door prop from the door striker just reverse the installation steps – C3, C4 Corvettes and cars with single bolt door striker: Pull the bottom of the prop rod loop out from under the striker bolt and lift it off.
  • Warranty: Guaranteed to fit your 1968 - 2014 Vette and prop your door open for interior display as described above. Each unit is handmade and tested.  Made in U.S.A.

 

 

 

 

 

Currently there are no reviews for this product. Share your opinion with others, be the first to write a review.

Add Your Review


Your Name:
Email Address:
Review:
Note: HTML is not translated! Your email address will not be shared with anyone.
Your Rating: 5
Verification:
Your Name:
Your Email:
Friends Name:
Friends Email:
Subject:
Message:
Verification: