|Your cart is currently empty|
C7 Corvette Corner Sub Box Turn Key Audio Package
Vettenuts has put together a complete Sub package for your C7 Corvette! The kit includes the following:
Driver Corner Sub Box
JL JX 500/1 Amp
JL Remote Bass Knob
PAC SNI-35 Harness
6 ft RCA's
Amp Wiring Kit (power and ground with in line fuse)
Fuse Jumper for amp remote power
*Add a JL10W3V3 4ohm if you need a sub*
We just finished up our first C7 Corner Sub Box! This will be for the Driver side only. We utilize the cubby compartment for air space and the Sub Box simply slides into place. All that needs to be done to install is to remove the cubby door.
We were able to make it a little larger than our C5/6 boxes, going from .57 to .62 Cf air space. The JL10W3V3 hits hard and sounds incredible. We used the existing sub out put wire and used a PAC harness to convert a RCA output for the amp. This allows you to use all your factory audio and makes for a plug and play install. We installed the bass knob on the knee bolster right below the hatch release. The carpet is not an exact match and we are actively looking for a flex form carpet that will match. None of my carpet vendors has anything at this time. The black carpet we used is really close and the lighting from the picture makes the color match worse than it is. The customer of this C7 was very pleased with the carpet match and the sound!
We are also releasing a C7 Partition, VetteBin and Premium Insulation Kit.
NOTE: Production times vary depending on order volume. We build these in house by hand. Please allow 2-7 business days for production.
If you currently have a subwoofer, here are the dimensions that fit our Sub Box.
Nominal Diameter 10.0 in / 250 mm Overall Diameter (A) 10.5 in / 267 mm Mounting Hole Diameter (B) 9.0625 in / 230 mm Bolt Hole Circle (C) 9.7 in / 246.5 mm Magnet Diameter (D) 5.25 in / 133 mm Mounting Depth (E) 5.93 in / 151 mm Driver Displacement 0.049 cu ft / 1.39 L Net Weight 12.25 lb / 5.56 kg